Here are a few important things to consider if you decide to tackle the job of painting your own house.  I cannot stress enough the importance of resisting the temptation of using the cheapest paint and the cheapest painting supplies.

Your job will turn out soooo much better if you spend a little more money and time doing the job right.  It is important to understand that you have to be patient when you are prepping for your paint job and this is where a lot of people fail.

It is boring and a real pain to tape off windows and other areas of a room and to protect the floors and furniture and then do the cut-ins and use the proper techniques when rolling out the room and on and on…

Here is a short article by a contributing writer on how to achieve professional results without hiring a professional.  Which, in hindsight, I would have hired a pro to do the job and saved myself a ton of frustration so you may want to consider it.

DIY Interior Paint Jobs – How to Achieve Professional Results
By Valerie Bokar

Part 1: The Importance of Having the Right Tools, Priming 101

While most large paint jobs require the help of a professional, you can probably tackle smaller jobs on your own. This will save money and provide you the satisfaction of a job well-done. Obtaining a high level of satisfaction is mostly a matter of preparation. First, you must have the right painting tools; second, you should adequately prepare the surface prior to painting.

Here, in Part One of this two-part series, we’ve provided a checklist of necessary painting supplies. Part Two outlines proper preparation steps to help you achieve professional-looking results.

Interior Painting Supply List:

1. Paint scraper: Scraping paint is an important first step in the preparation process. Use a paint scraper to remove loose paint, as well as other old materials. Investing a few extra dollars in a quality paint scraper is worth it, as you want to work quickly and comfortably (particularly if you have a lot of old paint to remove).
2. Sandpaper or steel wool: A smooth surface is necessary to achieve a great paint job. Even if you’ve scraped off the old paint, your surface is likely to be uneven. Use sandpaper with a minimum 400-grit or very fine steel wool then wipe off any residual powder with a tack cloth. Also, by “roughing-up” the surface with sandpaper or steel wool, you’ll help primer “stick” better than it will to a glossy surface.
3. Drop cloths: Use old blankets, sheets, or disposable plastic drop cloths to protect the floor and any heavy furniture that must remain in the room while you paint.
4. Masking tape: Protect window and door frames, floor and crown molding, and any other narrow surfaces on which you don’t want paint. Most DIY and paint supply stores offer colored painters tape in various widths; colored tape enables you to spot uncovered gaps better than manila-colored tape.
5. Extension ladder and step ladder: Unless you’re extremely tall or painting a low-ceilinged room, these are essential. Even if you are not vertically challenged, using a step ladder in an average size room reduces arm fatigue and lessons the strain on back and neck muscles.
6. Professional paint brushes: Always purchase high-quality brushes. Most jobs require a 4″ brush for “cutting in”; a 2″ brush for baseboards and trim; and a 1 1/2″ to 2″ angled sash brush for windows and smaller trim. Quality varies; however, resist the temptation to grab the least expensive. Cheap painting tools will barely last the job. Good brushes result in better application, are more comfortable to use, and can last a long time afterwards if properly cleaned.
7. Paint roller cages: A roller “cage” or frame is another part of a paint roller system. They are offered in different sizes, ranging from 3 to 16″. A professional roller frame will save you many hours of hard work and produce better results.
8. Paint roller extension poles: Paint roller cages are made with an opening at the bottom of the handle into which you can screw an extension pole. Poles come various lengths; some even “telescope” to give you several lengths in one pole. Extension poles give you easy access to hard- to-reach areas and also reduce arm fatigue.
9. Paint roller covers: Many professional painters agree that inexpensive paint roller covers are more trouble than they’re worth. Choose lambskin covers over polyester as lambskin holds more paint and is less likely to leave roller-track marks. Cover thicknesses span from 1/4″ for fine enamel work all the way up to 1 3/4″ thick for very rough surfaces. Typically, a 9″-wide cover is suitable for most projects; however, you can also select from 2″ wide for smaller jobs all the way up to 18″ wide for very large projects.
10. Paint roller trays: Paint roller trays come in a variety of sizes, depending on the size of your job, and are made of either plastic or metal. Accompanying paint tray liners which are disposable, keep trays clean so that you can reuse them and also reduce your clean up time.
11. Miscellaneous: Basic hand tools, like a screwdriver for removing switch plate covers and a hammer for removing nails, are a must. You’ll also need the screwdriver and hammer to remove, if necessary, the pins in the door hinges to take doors off. Here’s a small tip: Use a small plastic baggie to store the switch plate covers, screws and door pins. That way when you are ready to reassemble the room you have all the hardware/accessories in one place!

Depending on how much repair work needs to be done before you begin painting, you may also need a putty knife and putty or spackling compound to fill small holes; and / or a caulking gun and paintable caulk to fill large holes. Disposable coveralls and specialty paint pads are nice to have, but not necessary. A wet rag is also good for “oops” that need to be addressed immediately.

Choosing Primer

While specific primer formulations vary, they fall into 3 basic categories: “alkyd” (oil-based); “latex” (water-based); and “odorless stain blockers” — oil based formulations with less odor. Each offers specific advantages.

• Oil-Based Primer: Benefits include superior adhesion; ability to work on a variety of surfaces; and exceptional stain and odor blocking power. A primary drawback of oil-based products is that they contain high-levels of volatile organic compounds (VOCs). These can reduce indoor air quality and even pose health risks to young children and people with certain respiratory disorders. An additional drawback is these products need to be cleaned up with solvents like mineral spirits.
• Water-Based Primer: Prized for their speed-dry formula and easy clean-up, water-based products are significantly better for indoor air quality, as they contain very few or no VOCs. Water based primers have ease of clean up because they can be cleaned up easily with just soap and water. Disadvantages include poor adhesion and inadequate stain and odor blocking capabilities. There is a new water-based primer based on Hydro Pliolite® resin that claims to be able to block water soluble stains. Look for the Hydro Pliolite® logo on the can.
• Odorless Stain Blocking Primers: In response to world-wide demand for strong, but environmentally-friendly finishes, a new product category has emerged: odorless stain blocking primer. These primers are oil based and low in VOC. They are extremely effective in blocking tough stains and odors, and can be used on a variety of substrates, both indoors and out. Most importantly, they require less air turn over than traditional oil based primers.

Estimating How Much Paint You Need:

Today, estimating the amount of paint needed for a job is easier than ever. Many free online tools are available which simply require the room measurements to automatically calculate number of gallons. Check out the free primer and paint estimation tool at http://stainblockingprimers.com/.

Now that you have all the necessary tools, it’s time for the most important and time consuming part of a paint project: preparation. See Part 2 of DIY Interior Paint Jobs: How to Achieve Professional Results.

Valerie Bokar is Communications Manager for Eliokem, which manufactures dry and latex acrylic resins for the coatings industry. The company, which is headquartered in Villejust, France, also has locations in Ningbo, China, Valia in India and Akron, Ohio. For more information, please visit http://www.StainBlockingPrimers.com

Article Source: http://EzineArticles.com/?expert=Valerie_Bokar
http://EzineArticles.com/?DIY-Interior-Paint-Jobs—How-to-Achieve-Professional-Results&id=2986217

Brought to you today by Painters Whangarei

Okay this might seem strange, but this video on how paint is made is actually really interesting! It’s talking about a latex paint and the ingredients that go into it, how it is mixed and tested and what different elements are added for different types of paint.

I’ve also found another article that I think you’ll find interesting if you want a more in-depth look at paint production. (This article is from the following website: http://www.madehow.com/Volume-1/Paint.html)

Paint is a term used to describe a number of substances that consist of a pigment suspended in a liquid or paste vehicle such as oil or water. With a brush, a roller, or a spray gun, paint is applied in a thin coat to various surfaces such as wood, metal, or stone. Although its primary purpose is to protect the surface to which it is applied, paint also provides decoration.

Samples of the first known paintings, made between 20,000 and 25,000 years ago, survive in caves in France and Spain. Primitive paintings tended to depict humans and animals, and diagrams have also been found. Early artists relied on easily available natural substances to make paint, such as natural earth pigments, charcoal, berry juice, lard, blood, and milkweed sap. Later, the ancient Chinese, Egyptians, Hebrews, Greeks, and Romans used more sophisticated materials to produce paints for limited decoration, such as painting walls. Oils were used as varnishes, and pigments such as yellow and red ochres, chalk, arsenic sulfide yellow, and malachite green were mixed with binders such as gum arabic, lime, egg albumen, and beeswax.

Paint was first used as a protective coating by the Egyptians and Hebrews, who applied pitches and balsams to the exposed wood of their ships. During the Middle Ages, some inland wood also received protective coatings of paint, but due to the scarcity of paint, this practice was generally limited to store fronts and signs. Around the same time, artists began to boil resin with oil to obtain highly miscible (mixable) paints, and artists of the fifteenth century were the first to add drying oils to paint, thereby hastening evaporation. They also adopted a new solvent, linseed oil, which remained the most commonly used solvent until synthetics replaced it during the twentieth century.

In Boston around 1700, Thomas Child built the earliest American paint mill, a granite trough within which a 1.6 foot (.5 meter) granite ball rolled, grinding the pigment. The first paint patent was issued for a product that improved whitewash, a water-slaked lime often used during the early days of the United States. In 1865 D. P. Flinn obtained a patent for a water-based paint that also contained zinc oxide, potassium hydroxide, resin, milk, and lin-seed oil. The first commercial paint mills replaced Child’s granite ball with a buhrstone wheel, but these mills continued the practice of grinding only pigment (individual customers would then blend it with a vehicle at home). It wasn’t until 1867 that manufacturers began mixing the vehicle and the pigment for consumers.

The twentieth century has seen the most changes in paint composition and manufacture. Today, synthetic pigments and stabilizers are commonly used to mass produce uniform batches of paint. New synthetic vehicles developed from polymers such as polyurethane and styrene-butadene emerged during the 1940s. Alkyd resins were synthesized, and they have dominated production since. Before 1930, pigment was ground with stone mills, and these were later replaced by steel balls. Today, sand mills and high-speed dispersion mixers are used to grind easily dispersible pigments.

Perhaps the greatest paint-related advancement has been its proliferation. While some wooden houses, stores, bridges, and signs

The first step in making paint involves mixing the pigment with resin, solvents, and additives to form a paste. If the paint is to be for industrial use, it usually is then routed into a sand mill, a large cylinder that agitates tiny particles of sand or silica to grind the pigment particles, making them smaller and dispersing them throughout the mixture. In contrast, most commercial-use point is processed in a high-speed dispersion tank, in which a circular, toothed blade attached to a rotating shaft agitates the mixture and blends the pigment into the solvent.

were painted as early as the eighteenth century, it wasn’t until recently that mass production rendered a wide variety of paints universally indispensable. Today, paints are used for interior and exterior housepainting, boats, automobiles, planes, appliances, furniture, and many other places where protection and appeal are desired.

Raw Materials

A paint is composed of pigments, solvents, resins, and various additives. The pigments give the paint color; solvents make it easier to apply; resins help it dry; and additives serve as everything from fillers to antifungicidal agents. Hundreds of different pigments, both natural and synthetic, exist. The basic white pigment is titanium dioxide, selected for its excellent concealing properties, and black pigment is commonly made from carbon black. Other pigments used to make paint include iron oxide and cadmium sulfide for reds, metallic salts for yellows and oranges, and iron blue and chrome yellows for blues and greens.

Solvents are various low viscosity, volatile liquids. They include petroleum mineral spirits and aromatic solvents such as benzol, alcohols, esters, ketones, and acetone. The natural resins most commonly used are lin-seed, coconut, and soybean oil, while alkyds, acrylics, epoxies, and polyurethanes number among the most popular synthetic resins. Additives serve many purposes. Some, like calcium carbonate and aluminum silicate, are simply fillers that give the paint body and substance without changing its properties. Other additives produce certain desired characteristics

Paint canning is a completely automated process. For the standard 8 pint paint can available to consumers, empty cans are first rolled horizontally onto labels, then set upright so that the point can be pumped into them. One machine places lids onto the filled cans while a second machine presses on the lids to seal the cons. From wire that is fed into it from coils, a bailometer cuts and shapes the handles before hooking them into holes precut in the cans.

in paint, such as the thixotropic agents that give paint its smooth texture, driers, anti-settling agents, anti-skinning agents, defoamers, and a host of others that enable paint to cover well and last long.

Design

Paint is generally custom-made to fit the needs of industrial customers. For example, one might be especially interested in a fast-drying paint, while another might desire a paint that supplies good coverage over a long lifetime. Paint intended for the consumer can also be custom-made. Paint manufacturers provide such a wide range of colors that it is impossible to keep large quantities of each on hand. To meet a request for “aquamarine,” “canary yellow,” or “maroon,” the manufacturer will select a base that is appropriate for the deepness of color required. (Pastel paint bases will have high amounts of titanium dioxide, the white pigment, while darker tones will have less.) Then, according to a predetermined formula, the manufacturer can introduce various pigments from calibrated cylinders to obtain the proper color.

The Manufacturing
Process

Making the paste

• 1 Pigment manufacturers send bags of fine grain pigments to paint plants. There, the pigment is premixed with resin (a wetting agent that assists in moistening the pigment), one or more solvents, and additives to form a paste.

Dispersing the pigment

• 2 The paste mixture for most industrial and some consumer paints is now routed into a sand mill, a large cylinder that agitates tiny particles of sand or silica to grind the pigment particles, making them smaller and dispersing them throughout the mixture. The mixture is then filtered to remove the sand particles.
• 3 Instead of being processed in sand mills, up to 90 percent of the water-based latex paints designed for use by individual homeowners are instead processed in a high-speed dispersion tank. There, the premixed paste is subjected to high-speed agitation by a circular, toothed blade attached to a rotating shaft. This process blends the pigment into the solvent.

Thinning the paste

• 4 Whether created by a sand mill or a dispersion tank, the paste must now be thinned to produce the final product. Transferred to large kettles, it is agitated with the proper amount of solvent for the type of paint desired.

Canning the paint

• 5 The finished paint product is then pumped into the canning room. For the standard 8 pint (3.78 liter) paint can available to consumers, empty cans are first rolled horizontally onto labels, then set upright so that the paint can be pumped into them. A machine places lids onto the filled cans, and a second machine presses on the lids to seal them. From wire that is fed into it from coils, a bailometer cuts and shapes the handles before hooking them into holes precut in the cans. A certain number of cans (usually four) are then boxed and stacked before being sent to the warehouse.

Quality Control

Paint manufacturers utilize an extensive array of quality control measures. The ingredients and the manufacturing process undergo stringent tests, and the finished product is checked to insure that it is of high quality. A finished paint is inspected for its density, fineness of grind, dispersion, and viscosity. Paint is then applied to a surface and studied for bleed resistance, rate of drying, and texture.

In terms of the paint’s aesthetic components, color is checked by an experienced observer and by spectral analysis to see if it matches a standard desired color. Resistance of the color to fading caused by the elements is determined by exposing a portion of a painted surface to an arc light and comparing the amount of fading to a painted surface that was not so exposed. The paint’s hiding power is measured by painting it over a black surface and a white surface. The ratio of coverage on the black surface to coverage on the white surface is then determined, with .98 being high-quality paint. Gloss is measured by determining the amount of reflected light given off a painted surface.

Tests to measure the paint’s more functional qualities include one for mar resistance, which entails scratching or abrading a dried coat of paint. Adhesion is tested by making a crosshatch, calibrated to .07 inch (2 millimeters), on a dried paint surface. A piece of tape is applied to the crosshatch, then pulled off; good paint will remain on the surface. Scrubbability is tested by a machine that rubs a soapy brush over the paint’s surface. A system also exists to rate settling. An excellent paint can sit for six months with no settling and rate a ten. Poor paint, however, will settle into an immiscible lump of pigment on the bottom of the can and rate a zero. Weathering is tested by exposing the paint to outdoor conditions. Artificial weathering exposes a painted surface to sun, water, extreme temperature, humidity, or sulfuric gases. Fire retardancy is checked by burning the paint and determining its weight loss. If the amount lost is more than 10 percent, the paint is not considered fire-resistant.

Byproducts/Waste

A recent regulation (California Rule 66) concerning the emission of volatile organic compounds (VOCs) affects the paint industry, especially manufacturers of industrial oil-based paints. It is estimated that all coatings, including stains and varnishes, are responsible for 1.8 percent of the 2.3 million metric tons of VOCs released per year. The new regulation permits each liter of paint to contain no more than 250 grams (8.75 ounces) of solvent. Paint manufacturers can replace the solvents with pigment, fillers, or other solids inherent to the basic paint formula. This method produces thicker paints that are harder to apply, and it is not yet known if such paints are long lasting. Other solutions include using paint powder coatings that use no solvents, applying paint in closed systems from which VOCs can be retrieved, using water as a solvent, or using acrylics that dry under ultraviolet light or heat. A consumer with some unused paint on hand can return it to the point of purchase for proper treatment.

A large paint manufacturer will have an in-house wastewater treatment facility that treats all liquids generated on-site, even storm water run-off. The facility is monitored 24 hours a day, and the Environmental Protection Agency (EPA) does a periodic records and systems check of all paint facilities. The liquid portion of the waste is treated on-site to the standards of the local publicly owned wastewater treatment facility; it can be used to make low-quality paint. Latex sludge can be retrieved and used as fillers in other industrial products. Waste solvents can be recovered and used as fuels for other industries. A clean paint container can be reused or sent to the local landfill.

Well, have you ever had one of those experiences in life that left you so angry, so upset that you promised yourself that when it was over you were going to make sure everyone in the world knew about it and that the person who hurt you would pay dearly for their actions?

Most of us have.  Now, to many of us, it is no secret how unscrupulous home improvement contractors can be… But we never think it will be one of us that gets taken, right?!

You hire a guy out of the yellow book to do a home improvement project around the house and he takes the deposit and never shows up, or if he does, the job is done in a less than professional manner, often left incomplete and with him demanding final payment.

Of course most of do not have the energy to actually try and make a change in this world after having gone through an experience like that, but I pledged to at least try and so I have.  I now give you Painters Whangarei and if I can spare just one person the horror I went through while simply trying to get our house painted, well then, I’ve done a good thing.

How can Painters Whangarei help you?

If you are thinking about painting your house yourself, or hiring a professional Auckland Painter to do it for you, I sure hope you will take a few moments to read through this page to help prepare yourself for the process.

This few moments of your time could save you hundreds, if not thousands of dollars and probably a ton of grief as well.

Painting a house, either an interior paint job or an exterior one, is not something we average folk do very often.  However, it is one major home improvement task many of us feel we can take on ourselves.  How hard can it be, right?

I thought the same thing.  After wasting a lot of money and a few weekends trying to paint our house, I was finally convinced to call a professional painter to finish and fix what I had started.

Pretty humiliating, and embarrassing… and of course, avoidable had I taken the time to educate myself on a few very important painting techniques.  Not to mention committing the cardinal sin most novice weekend warriors make… choosing the least expensive paint!

Also, I convinced myself primer was just the paint manufactures way of wringing more money out of you and was an unnecessary step in the painting process… wrong again!

Well, I tucked my tail between my legs and admitted  I was in over my head and  moved on to the monumental task of looking for a professional painter.  Of course I did not do my homework again and my bad painting project turned into an absolute nightmare!

Painters Auckland… righting a few wrongs?

This website, Painters Auckland, is my attempt to right a few wrongs.  Now, you may have noticed that the name of my site is a bit awkward but I chose these words specifically because they were exactly what I typed into Google when I started my search for a local painting contractor.

You may have done the same and hopefully I showed up and can now give you a few pointers on how to locate a great contractor, or, if you want to do the project yourself, give you some tips on how to go about it.

From exterior painting to interior painting, from the tools necessary to do the job properly to the type of paint to use, I will try and share with you what I have learned over the last few months.

I will also recommend a couple of Painters Auckland whom I feel are not only professional, timely and honest, but affordable as well.

I’ll provide links to helpful sites like paint suppliers and manufactures as well as looking at the pros and cons of doing the project yourself versus hiring a professional painting contractor.

I’ll tell you what to look for when interviewing and choosing Painters Auckland as well as what credentials they should have.

If you are a DIY kind of guy or gal we will look at things like color choice, interior and exterior surface preperation, various painting techniques, drywall repair, the proper caulk to use (I stuffed  up big time on this one!), the proper painting tools to use including brushes, rollers, sprayers and so much more!

So, if you do not know your latex from your acrylics, or your enamels from your elbows, then please spend a few minutes going through the site.

Painters Auckland is an ever expanding source for the little guy, put together by a little guy just trying to right a few wrongs and make our city a better place!  Not to mention one that is beautifully painted with no drips or pieces of cheap roller lint mucking up our fabulous finishes!

Well I hope you got a little bit of helpful information here at Painters Auckland, don’t forget to check out our recommended painters, we KNOW they’ll be great!